Intrepid 9.7 Military Skis

With a utility-inspired 97mm waist, rockered tip/tail, and perfectly balanced radius, the uber-versatile, lightweight Intrepid 9.7 is well suited to do it all – from breaking trail in uncharted terrain to falling into a well-tracked line.

*Please Note: Serket Ski and Binding products are not available for public purchase.

Part Info:

Part#1815-INT9

How To Buy
  • Designed for Efficient Skinning, Climbing, Trail Breaking, and Hard-Charging Skiing
  • Pre-mounted with Stainless Steel Threaded Inserts for Serket Patrol Binding, or Blank for use with Commercial AT Binding
  • Rockered Tip and Slightly Rockered Tail for Easy Back Country Gliding and Mastery
  • Traditional Sintered or Posi-Trac Bases
  • Highly Versatile All-Terrain/Touring Platform
  • Compatible with all Binding/Skin Systems
  • Snow Camo Top Sheets
  • Suitable for a Wide Variety of Snow Conditions
  • Super-Lightweight
  • 3 Year Warranty
  • Lengths: 155cm, 162cm, 169cm
  • Dimensions: 128mm x 97mm x 113mm
  • Radius: 15m, 16m, 18m
  • Skis Weight: 6.1 lbs, 6.5 lbs, 6.9 lbs
  • Camber: 5mm
  • Tip Rise: 31 cm
  • Tail Rise: 19cm

Step 1 – Cleaning
Wipe thoroughly with a damp towel or cloth to remove dirt, salt, grime, etc. Avoid using degreasers or detergents. To remove the buildup of grease or spring pollen on the bases (usually manifested as a thick gray or black film on the base) lightly rub with a cloth dipped in a small amount of citrus solvent.

Step 2 – Check the Edges
Completely dry edges and ensure skis are stored in a dry, moisture-free environment to avoid edge rust. Remove the most obvious burrs to reduce the chances of rust and sharpen the edges. All Serket Military Skis have factory 1-degree side edge bevels and 1-degree flat edge bevels (88-degree angle).

Step 3 – Base Repair (if necessary)
For base gouges and scars, P-tex and/or base welds can repair the damage on both traditional Sintered Bases as well as extruded Posi-PosiTrac bases. For more severe base and edge damage, it may be necessary to do a base patch and or edge repair. A trained and experienced ski technician should conduct the repair.

Step 4 – Waxing for Use and Waxing for Storage (ideal but not essential)
To increase the skis’ gliding performance, use a hot or glide-on wax,
preferably within the temperature ranges where the skis operate.
For storage, it is ideal to hot wax the bases with an all-temperature or a
softer warm-weather wax to protect them from oxidation, but do not scrape it off. Be generous with the wax, and cover the edges, which will help keep rust away.
(Base waxing is ideal but less critical for extruded “Posi-Trac” bases).

Step 5 – Storage
Store in a dry, temperate place out of the sun. Store the skis in a neutral position with no pressure on the camber or rocker. Do not hang by the tips between two dowels or with the camber compressed by straps.

Step 6 – Prepare for Use
To prepare the skis for winter use, scrape the wax off (if hot storage wax
has been applied), brush, and go if an all-temperature wax was used. If a
warm weather wax was used, scrape it off and re-wax for the current
temperature. (Base waxing is ideal but less critical for extruded “Posi-Trac” bases).

Questions? Contact us at info@SerketUSA.com

1. CARBONIUM TOPSHEET MATERIAL
2. MATTE FIBERGLASS MOUNTING PLATE (TIERED)
3. UNILATERAL FIBERGLASS
4. DURASURF 2001 P-TEX SIDEWALL
5. ULTRALIGHT WOOD CORE WITH BIRCH INLAYS AT MOUNTING POINTS
6. 20mm RUBBERFOIL (3 LAYERS)
7. 2.2mm STEEL EDGE
8. ETLX 2200 TRIAXLE FIBERGLASS
9. DURASURF 4001 SINTERED P-TEX BASE OR POSI-TRAC WAX-LESS BASES

Related products